Parts and fabrication
Gnimu Labs does not sell kits or finished devices. You buy the parts, have a board made if you want one, and assemble it yourself. Nothing here is an affiliate link, and I have no relationship with any of these suppliers.
Bills of materials
The full, current parts lists are kept with the build guides so that they stay in step with the firmware:
The main components are:
| Part | ESP32 build | XIAO nRF52840 build |
|---|---|---|
| Microcontroller | ESP32-WROOM-32 dev board | Seeed XIAO nRF52840 Sense |
| GNSS module | HGLRC M100-5883 | HGLRC M100-5883 |
| IMU | MPU-6050 breakout | Built into the XIAO |
| Power | USB | 3.7V LiPo, XL63020 or XL63070 buck-boost module |
| Board | None; hand-wired | Optional Gnimu carrier PCB |
Where to buy components
- The GNSS module, the buck-boost modules, LiPo cells, and most of the other parts are easy to find online at Amazon, or from hobby and electronics suppliers.
- Seeed Studio makes the XIAO boards. They’re usually available on Amazon, but at a slight price premium.
- DigiKey carries the XIAO boards, diodes, resistors, switches, connectors and buck modules.
- AdaFruit carries the CAN Pal module used by the Gnimu-CAN build.
Having a board made
The boards are two-layer, which any hobbyist PCB service can make at its cheapest settings.
- OSH Park: Oregon-based PCB supplier. Upload gerbers or
.kicad_pcbfiles directly. Not as cheap as JLCPCB or PCBWay, but US-based and free shipping with no added tariff/customs costs. Cool purple boards too. - JLCPCB: China-based supplier. Upload the gerber zip from the revision’s
fabrication/folder. - PCBWay: China-based supplier. Upload the gerber zip.
Where a revision has no gerbers in the repository yet, open the project in KiCad 10 and plot them yourself.
See the PCB project page for which revisions have been fabricated.